The continuous carbon fiber fabric reinforced thermoplastic prepreg production line evenly sprays thermoplastic powder on the fiber fabric through a powder spreader, and melts the resin through a high-temperature oven. This machine is suitable for pre-impregnating various resins PEEK, PA, PC, PI and carbon fiber fabrics, glass fiber fabrics and aramid fiber fabrics.
The continuous fiber fabric coating prepreg production line applies resin to the fiber fabric through coating, and impregnates the resin into the fabric through a high-temperature oven. This machine is suitable for coating treatment of various fiber fabrics, carbon fiber fabrics, glass fiber fabrics and aramid fiber fabrics. Fabrics made from aramid and carbon fiber yarns can be used to process a variety of chemical products.
The radiant oven process allows the entire coating volume to be heated simultaneously. The frequency range of infrared heat waves allows efficient absorption by the resin. When using a conventional dryer system, the temperature distribution across the thickness of the web becomes almost constant, instead of being maximum at both surfaces and minimum at the center of the thickness. This heats the material faster, evaporates the solvent faster, and cures the resin faster without other undesirable effects such as overheating or skinning (bubbles).
Thermo Press Double Belt Press System Our composite continuous production line can work continuously and has an integrated double belt press with contact heating and contact cooling. The top belt unit can be laminated via a precision spindle function that adjusts the gap to perfectly suit the thickness of the material and product being laminated.Applicable to: carbon fiber, ceramic fiber felt, glass fiber, prepreg, airgel felt, sound insulation cotton, aramid, honeycomb panel, graphene, sponge, insulation cotton, non-woven fabric, hot melt film, PP fiberglass film Materials such as thermoplastics are suitable for hot pressing materials.
The SZUD-2318 production line is suitable for ultra-high molecular weight polyethylene fiber and aramid fiber UD fabrics. The production line has a high degree of automation, is easy to operate and requires less labor. The production speed is greater than 10m/min. According to the lightweight demand of the high-end product market, we can currently achieve a single-layer density of UD fabrics of 25 grams/square meter.
